Get Financing1 - 28 of 30 Listings
RentAll
Cutting Width: 30 ft
Serial Number: 28076
Condition: Used
Stock Number: 28076
Description: 30' rigid draper head, JD single point hookups, tilt cylinder, 3" knife, Flip over reel, steel tines, safety lights,
QUICK & EASY ONSITE LOW F...
Updated: Monday, October 19, 2026 03:34 PM
Location: Holgate, Ohio
Seller: Randall Brothers
Cutting Width: 30 ft
Serial Number: 331009-18
Condition: Used
Stock Number: E00679748
Hydraulic Hookup: Single Point
Knife Drive: Dual
Description: HEAD WILL RUN AND CUT AS IS, GOOD HEAD WITH TRANSPORT FOR SP WINDROWER, NO COMBINE ADAPTOR, SPLIT REEL, DUAL KNIFE DRIVE, NO DECK SHIFT
Mechanica...
Updated: Wednesday, October 14, 2026 02:04 PM
Location: Mccook, Nebraska
Seller: Titan Machinery
Cutting Width: 40 ft
Serial Number: 48813
Condition: Used
Stock Number: E00683889
Poly Skid Shoes: Yes
Hydraulic Hookup: Single Point
Description: New Drum and ready for the field!
Mechanical Condition: VERY GOOD
Contour: N/A
TelescopingDrive: N/A
Updated: Wednesday, October 14, 2026 02:04 PM
Location: Mandan, North Dakota
Seller: Titan Machinery
Cutting Width: 40 ft
Cutterbar Type: Rigid
Serial Number: 275602
Condition: Used
Fore/Aft Reel: Yes
Split Reel: Yes
Description: 2015 MacDon D65S, slow speed transports, set for CNH, extremely nice. Matching header available as well!
Updated: Wednesday, October 28, 2026 01:07 PM
Location: Goodland, Kansas
Seller: Yost Farm Supply (Goodland)
Cutting Width: 30 ft
Cutterbar Type: Rigid
Serial Number: 248589-14
Condition: Used
Stock Number: 808955
Poly Skid Shoes: Yes
Description: Fit's JD Combines S670,S680,S690 Machines
This header has been through our shop
Has new Draper Belts, New Guards, New knife sections, replace wha...
Updated: Monday, October 12, 2026 11:08 AM
Location: Augusta, Arkansas
Seller: Eldridge Supply Company
Cutting Width: 35 ft
Serial Number: D65
Condition: Used
Stock Number: 281547
Gathering Type: Draper
Description: 2014 MacDon D65-35 draper with transport wheels. For more information, contact Western Equipment at (or ssparks@ today!
2014 MacDon D65-35
Updated: Tuesday, October 06, 2026 01:51 PM
Location: Dalhart, Texas
Seller: Western Equipment - Dalhart, TX
Cutting Width: 35 ft
Cutterbar Type: Flex
Serial Number: 248649
Condition: Used
Stock Number: 379968
Poly Skid Shoes: Yes
Description: 2014 MACDON D65-35, 35 FOOT CUTTING WIDTH, RIGID DRAPER, NON-FULL FINGER AUGER, STEEL AUGER FINGERS, NO TOP CROP AUGER, LOW STONE DAM, FORE/AFT REE...
Updated: Tuesday, October 20, 2026 04:41 PM
Location: Rexburg, Idaho
Seller: C & B Operations, LLC - Rexburg
Cutting Width: 35 ft
Cutterbar Type: Rigid
Serial Number: 292901-16
Condition: Used
Stock Number: UH6299
Gathering Type: Draper
Description: Slow Speed Transport
Upper Cross Auger
JD Configuration
Updated: Friday, October 23, 2026 09:49 AM
Location: Assiniboia, Saskatchewan, Canada
Seller: Young's Equipment Inc.
Serial Number: 292562-16
Condition: Used
Stock Number: 0201069258
Description: Double knife drive
Slow speed transport
40FT
Hours: 0
Updated: Tuesday, October 13, 2026 10:26 AM
Location: Swift Current, Saskatchewan, Canada
Seller: Redhead Equipment
Cutting Width: 40 ft
Serial Number: 296505
Condition: Used
Stock Number: 18690C
Description: 40ft Rigid Header
Transport
Upper Cross Auger
Typhoon Drum
Full Poly
2 Seasons on Center Canvas
Stored Inside
Updated: Tuesday, October 27, 2026 04:56 PM
Location: Dauphin, Manitoba, Canada
Seller: Mazergroup Ltd.
Cutting Width: 40 ft
Serial Number: 292986
Condition: Used
Stock Number: 18691C
Description: 40ft Rigid Header
Transport
Upper Cross Auger
Typhoon Drum
Full Poly
2 Seasons on Center Canvas
Stored Inside
Updated: Tuesday, October 27, 2026 04:56 PM
Location: Dauphin, Manitoba, Canada
Seller: Mazergroup Ltd.
Serial Number: 276751-15
Condition: Used
Stock Number: 203145
Description: Notes: SLOW SPEED TRANSPORT, CNH Adapter
Updated: Wednesday, October 28, 2026 11:02 AM
Location: Camrose, Alberta, Canada
Seller: Rocky Mountain Equipment - Camrose
Condition: Used
Stock Number: C2605C
Description: SLOW SPEED TRANSPORT, UPPER CROSS AUGER
Updated: Wednesday, September 23, 2026 03:19 PM
Location: Paradise Hill, Saskatchewan, Canada
Seller: Novlan Bros. Sales
Serial Number: 261677-14
Condition: Used
Stock Number: 202744
Description: Notes: SLOW SPEED TRANSPORT, Contour Buddy, CNH Adapter
Updated: Wednesday, October 28, 2026 11:02 AM
Location: Camrose, Alberta, Canada
Seller: Rocky Mountain Equipment - Camrose
Cutting Width: 35 ft
Condition: Used
Stock Number: U002981
Gathering Type: Draper
Description: 35 FT DRAPER HEADER
SINGLE KNIFE DRIVE
CA25 ADAPTER
SLOW SPEED TRANSPORT
Updated: Monday, October 05, 2026 02:20 PM
Location: Beaverlodge, Alberta, Canada
Seller: Foster's Agri-World
Serial Number: 247096-14
Condition: Used
Stock Number: 182058
Description: Notes: SLOW SPEED TRANSPORT
Updated: Wednesday, October 28, 2026 10:57 AM
Location: Neepawa, Manitoba, Canada
Seller: Rocky Mountain Equipment - Neepawa
Condition: Used
Stock Number: C2102F
Description: 2013 MACDON D6530SK CR/CX
CALL FOR MORE INFORMATION
Updated: Wednesday, September 23, 2026 03:19 PM
Location: Paradise Hill, Saskatchewan, Canada
Seller: Novlan Bros. Sales
Cutting Width: 35 ft
Condition: Used
Stock Number: U003091
Knife Drive: Dual
Slow Speed Transport: Yes
Description: UPPER CROSS AUGER
Updated: Monday, October 05, 2026 02:20 PM
Location: Beaverlodge, Alberta, Canada
Seller: Foster's Agri-World
Cutting Width: 35 ft
Condition: Used
Stock Number: U003092
Knife Drive: Single
Slow Speed Transport: Yes
Description: UPPER CROSS AUGER
Updated: Monday, October 05, 2026 02:20 PM
Location: Beaverlodge, Alberta, Canada
Seller: Foster's Agri-World
Cutting Width: 40 ft
Serial Number: 248734
Condition: Used
Stock Number: 17558D
Knife Drive: Single
Slow Speed Transport: Yes
Description: 40ft
Fore & Aft
Slow Speed Transport
Single Knife
Hyd Tilt
Updated: Tuesday, October 27, 2026 04:56 PM
Location: Roblin, Manitoba, Canada
Seller: Mazergroup Ltd.
Serial Number: 248732
Condition: Used
Stock Number: 17321C
Description: Single Knife
Fore & Aft
Hyd Angle
Updated: Tuesday, October 27, 2026 04:56 PM
Location: Roblin, Manitoba, Canada
Seller: Mazergroup Ltd.
Cutting Width: 35 ft
Serial Number: 238598-13
Condition: Used
Stock Number: 270130
Gathering Type: Draper
Description: 35' Rigid Draper Header w/ Single Knife Drive,
Single Reel w/ Fore/Aft,
10" Upper Cross Auger,
Header Height Sensing,
Poly Skid Shoes,
Integra...
Updated: Wednesday, October 21, 2026 07:06 AM
Location: Yorkton, Saskatchewan, Canada
Seller: Pattison Agriculture
2017 MAC DON D65
Platform Headers
USD $42,671
(GST applies to buyers in Australia)
Serial Number: 307961
Condition: Used
Stock Number: EQ0003381
Description: MacDon D65 Draper Front (2017)
- 45ft working width
- Comb trailer
This unit is located in Katanning. For further information, please contact Joshu...
Updated: Sunday, October 25, 2026 10:40 PM
Location: Albany, Western Australia, Australia
Seller: McIntosh & Son
2016 MAC DON D65
Platform Headers
USD $96,979
(GST applies to buyers in Australia)
Cutting Width: 44.95 ft
Condition: Used
Stock Number: 503347
Draper Cross Auger: Yes
Gathering Type: Draper
Description: USED 2016 MACDON D65 13.7M 45' DRAPER FRONT
45FT Cut Width, Full Length Top-Cross Auger, Genuine Macdon Fingers & Guards, New Draper Mats Including...
Updated: Wednesday, October 28, 2026 07:12 PM
Location: Dalwallinu, Western Australia, Australia
Seller: Boekeman Machinery
2016 MAC DON D65
Platform Headers
USD $96,979
(GST applies to buyers in Australia)
Cutting Width: 45 ft
Condition: Used
Stock Number: 503663
Gathering Type: Draper
Description: USED 2016 MACDON D65 45' DRAPER FRONT
MY16, MacDon 45' D65 front with trailer suit Case IH or New Holland machine. Typhoon RTD, trailer, canola aug...
Updated: Wednesday, October 28, 2026 07:12 PM
Location: Dowerin, Western Australia, Australia
Seller: Boekeman Machinery
2016 MAC DON D65
Platform Headers
USD $74,057
(GST applies to buyers in Australia)
Cutting Width: 40 ft
Cutterbar Type: Rigid
Condition: Used
Stock Number: 503635
Gathering Type: Draper
Description: USED 2016 MACDON D65 40' DRAPER FRONT
MacDon D65 40ft Draper Draper, MY16 Primary sales Quad guards and high knife kit, Full width TCA, Aftermarket...
Updated: Wednesday, October 28, 2026 07:12 PM
Location: Dalwallinu, Western Australia, Australia
Seller: Boekeman Machinery
2015 MAC DON D65
Platform Headers
USD $84,636
(GST applies to buyers in Australia)
Cutting Width: 40 ft
Condition: Used
Stock Number: 503614
Draper Cross Auger: Yes
Gathering Type: Draper
Description: USED 2015 MACDON D65 40' DRAPER FRONT
2015 Build MacDon D65 Front, Full length upper top cross auger, Primary Sales 3 Finger Guards, Typhoon style ...
Updated: Wednesday, October 28, 2026 07:12 PM
Location: Wongan Hills, Western Australia, Australia
Seller: Boekeman Machinery
2015 MAC DON D65
Platform Headers
USD $74,057
(GST applies to buyers in Australia)
Cutting Width: 40 ft
Condition: Used
Stock Number: 503737
Gathering Type: Draper
Description: USED 2015 MACDON D65 40' DRAPER FRONT
Top Cross Auger, Good Mats, Slick Tyres, Nice Straight Machine.
Located in Dalwallinu.
$105,000 INC GST.
Updated: Wednesday, October 28, 2026 07:12 PM
Location: Dalwallinu, Western Australia, Australia
Seller: Boekeman Machinery
