Get Financing1 - 28 of 64 Listings
RentAll
Serial Number: 1111111
Condition: Used
Number of Shanks: 7
Mounting Type: Pull-Type
Frame Type: 1-Section
Description: John Deere 714
Disk Chisel
7 Shank
Good Blades and Bearings
No Welds
Very clean unit, always stored inside
Comes from a small 100-acre farm
Updated: Friday, September 04, 2026 10:01 AM
Location: Marshall, Wisconsin
Seller: Allen Wolfe LLC
Working Width: 14 ft
Serial Number: N00714X003289
Condition: Used
Stock Number: MICAH-30590
Number of Shanks: 11
Field Ready: Yes
Description: JD 714 DISK CHISEL, 11 SHANK CHISEL, HYD DISK GANG ADJUSTMENT, 4 NEW TIRES, REPAINTED RIMS, SHANKS AND DISKS, SPENT $1100 GOING THROUGH IT, 3" CHIS...
Updated: Wednesday, September 02, 2026 05:32 PM
Location: Rockford, Illinois
Seller: Meridian Implement
Working Width: 16 ft 3 in
Condition: Used
Number of Shanks: 13
Description: 13 shank disc chisel, walking tandems. Tru depth standards, delivery available
Updated: Thursday, September 03, 2026 04:11 PM
Location: Ledyard, Iowa
Seller: Reese Farm Machinery
Working Width: 12 ft
Serial Number: N00714X000743
Condition: Used
Number of Shanks: 9
Operating Condition: Operable
Field Ready: Yes
Description: John Deere 714 Chisel Plow
9-Shank
Automatic Reset Shanks
Front Disk Blades
Hydraulic Adjustment of Disk Gangs
Updated: Thursday, September 03, 2026 12:10 PM
Location: Antigo, Wisconsin
Seller: M&J Equipment Sales Llc
Condition: Used
Description: John Deere 714 9 shank disk chisel, walking tandems, Tru-Depth standards, hydraulic disk adjust, low use machine!
Updated: Wednesday, September 02, 2026 09:06 AM
Location: Lansing, Iowa
Seller: Bill's Tractors
Serial Number: PICTURED
Condition: Used
Number of Shanks: 9
Mounting Type: Pull-Type
Rear Attachment: Yes
Rear Attachment Type: Spike / Drag
Description: John Deere 714 chisel plow, 9 shank, spring reset, Remlinger mounted 5 bar spike tooth harrow, lights, good paint, very clean low use unit, $14500,...
Updated: Tuesday, September 08, 2026 02:28 PM
Location: Elkhorn, Wisconsin
Seller: E.J.A Equipment, LLC
Working Width: 21 ft
Serial Number: 1N00714XEP0050009
Condition: Used
Description:
Updated: Thursday, September 03, 2026 10:51 AM
Location: Elmer, New Jersey
Seller: Central Jersey Equipment - Hammonton
Working Width: 11 ft
Serial Number: 1P00714XACD009111
Condition: Used
Stock Number: 62100
Description: 2012 John Deere 714, 11', Rigid.
9 shank
Updated: Thursday, September 03, 2026 09:34 AM
Location: Waukon, Iowa
Seller: Bodensteiner Implement Inc.
Working Width: 16 ft
Serial Number: N00714X007938
Condition: Used
Number of Shanks: 13
Shank Spacing: 15 in
Operating Condition: Operable
Description: 13 shank, 5 bar spike harrow, hydraulic adjust spring mounted disc gang with scrapers, has the upgraded Heavy Duty Tru Depth shanks, 1,250lb trip f...
Updated: Sunday, September 13, 2026 07:31 AM
Location: Silver Lake, Indiana
Seller: Polley Equipment, LLC
Working Width: 21 ft
Serial Number: N00714X007462
Condition: Used
Stock Number: 397255
Number of Acres: 40,000 ac
Description: Size: 21 ft/Kind: 3-Section Folding/Rear Hitch, Spring Reset, Hydraulic Depth Control, Tires
Rear Hitch, Spring Reset, Hydraulic Depth Control, Tires
Updated: Wednesday, September 02, 2026 08:40 AM
Location: Portland, Michigan
Seller: Hutson
Serial Number: N00714X007437
Condition: Used
Number of Shanks: 9
Rear Attachment: Yes
Walking Tandems on Mainframe: Yes
Rear Attachment Type: S-Tine Leveler
Description: John Deere 714 Disc Chisel, 9 shank, spring reset, hydraulic front blades measure 19", single point depth control, NEW 3" twist points, walking tan...
Updated: Friday, September 11, 2026 02:29 PM
Location: Huntington, Indiana
Seller: Ayers Machinery
Working Width: 11 ft
Serial Number: N00714X007093
Condition: Used
Stock Number: 249355
Description: 11 Ft, #249355
Updated: Tuesday, September 01, 2026 11:05 AM
Location: West Salem, Wisconsin
Seller: Tractor Central
Condition: Used
Description: 9 SHANK, TRU-DEPTH, HYD DISC CONTROL, LIGHT KIT, SINGLE POINT DEPTH ADJUSTMENT
Updated: Tuesday, September 01, 2026 11:54 AM
Location: Marshall, Wisconsin
Seller: Hellenbrand Implement
Working Width: 13 ft
Serial Number: N00714X005784
Condition: Used
Rear Attachment: Yes
Walking Tandems on Mainframe: Yes
Rear Attachment Type: S-Tine Leveler
Description: John Deere 714 disc chisel, 11 shank, new 3 inch twists, tandem, rear s-tine leveler, solid rear frame, no welds
Updated: Thursday, September 03, 2026 09:34 AM
Location: Greenwald, Minnesota
Seller: Greenwald Farm Center
Working Width: 11 ft
Serial Number: N00714X005662
Condition: Used
Stock Number: 176991
Description: 9 SHANK SINGLE AXLE
STRAIGHT DISC UP FRONT
HYDRAULIC ADJUST
SHOVELS & SHANKS GOOD
NO WELDS
PAINT IS AVERAGE
Updated: Tuesday, September 01, 2026 03:46 PM
Location: Columbus, Wisconsin
Seller: Mid-State Equipment
Working Width: 8 ft
Serial Number: N00714X005620
Condition: Used
Mounting Type: Pull-Type
Rear Attachment: Yes
Rear Attachment Type: Coil Tine
Description:
Updated: Tuesday, September 08, 2026 03:44 PM
Location: Delphos, Ohio
Seller: H.G. Violet Equipment
Working Width: 11 ft
Serial Number: N00714X005570
Condition: Used
Stock Number: 247748
Description: 11 Ft, 9 Shank, Spike Tooth Harrow, 32" Tru-Depth Spring Reset Standards, #247748
9 SHANK
SPIKE HARROW
4" CONCAVE TWISTED SHOVELS
FRONT COULTER...
Updated: Thursday, September 10, 2026 03:50 PM
Location: Granton, Wisconsin
Seller: Tractor Central
Working Width: 11 ft
Serial Number: N00714X004767
Condition: Used
Stock Number: 566137
Description: 1995 John Deere 714. Mulch Tillers
Size: 11 ft
Updated: Wednesday, September 02, 2026 07:31 AM
Location: Stoneboro, Pennsylvania
Seller: LandPro Equipment LLC
Serial Number: N00714X004180
Condition: Used
Stock Number: 9902
Description:
Updated: Friday, August 21, 2026 01:32 PM
Location: Fort Recovery, Ohio
Seller: K & L Tractor Sales Inc.
Serial Number: N00714X003169
Condition: Used
Stock Number: 04105
Description: JOHN DEERE 714 11 SHANK DISC CHISEL, HYDRAULIC FRONT BLADES, TRU-DEPTH SHANKS W/ 2" POINTS, SINGLE POINT DEPTH CONTROL, WALKING TANDEM, GOOD CLEAN ...
Updated: Tuesday, September 01, 2026 01:36 PM
Location: Leesburg, Indiana
Seller: Polk Equipment, Inc.
Working Width: 11 ft
Serial Number: N00714X003215
Condition: Used
Stock Number: 40547
Description:
Updated: Friday, September 04, 2026 04:10 PM
Location: Demotte, Indiana
Seller: Castongia Tractor
Working Width: 1 ft
Serial Number: N00714X001923
Condition: Used
Stock Number: 378842
Frame Type: 1-Section
Description: 1990 JOHN DEERE 714, 12' WORKING WIDTH, 9 STANDARDS, 16" SHANK SPACING, DOUBLE-POINTED TWIST SHOVELS, SINGLE POINT DEPTH CONTROL, 2 SCVS REQUIRED, ...
Updated: Thursday, September 10, 2026 04:51 PM
Location: Lake Park, Iowa
Seller: C & B Operations LLC - Lake Park
Working Width: 13 ft
Serial Number: N00714X002904
Condition: Used
Stock Number: CONSIGNMENT
Description: JOHN DEERE 714 CHISEL PLOW
Updated: Thursday, September 03, 2026 02:36 PM
Location: Alamosa, Colorado
Seller: US Tractor & Harvest
Working Width: 16 ft
Serial Number: N00714X001959
Condition: Used
Stock Number: 616236
Frame Type: 1-Section
Description: 16' mulch tiller, 3-bar harrow
Updated: Wednesday, September 09, 2026 05:05 PM
Location: Madison, Minnesota
Seller: Midwest Machinery Co. - Madison
Working Width: 12 ft
Serial Number: N00714X000879
Condition: Used
Stock Number: 12908
Number of Shanks: 9
Field Ready: Yes
Description: John Deere 714 Mulch Tiller. 12' Working Width. 20 1'2" Blades With Scrapers On 9" Spacing. 9 Shank Spring Reset With 3" Twisted Shovels. Remlinger...
Updated: Thursday, August 20, 2026 08:21 AM
Location: Martinsville, Indiana
Seller: B&R Equipment
Serial Number: N00714X001255
Condition: Used
Rear Attachment Type: S-Tine Leveler
Frame Type: 1-Section
Description: 19" Blades, 15' 6'' Working Width, 13 shank, S tine Rear Harrow, Good Tires, Local Trade in
Updated: Wednesday, September 09, 2026 08:53 AM
Location: Farley, Iowa
Seller: CJ Beeps Equipment
Serial Number: N00714X001000
Condition: Used
Stock Number: B5213
Description: 1989 John Deere 714 Chisel Plow, 9 Shanks, 11' Working Width, Front Coulter Gangs, Single Point Depth Control
Updated: Friday, September 04, 2026 01:54 PM
Location: Farley, Iowa
Seller: CJ Beeps Equipment
Working Width: 13 ft
Serial Number: N00714X000189
Condition: Used
Stock Number: C30944
Number of Shanks: 7
Operating Condition: Operable
Description: Used 1988 John Deere 714 chisel plow, 7-shank, 3" twist
shanks, front spring-loaded discs, hydraulic cylinders,
9.5L-15 tires.
Updated: Monday, August 31, 2026 03:16 PM
Location: Thorp, Wisconsin
Seller: Swiderski Equip, Inc. - Thorp
