Get Financing169 - 196 of 2,547 Listings
Cutting Width: 25 ft
Serial Number: JJC0329481
Condition: Used
Stock Number: 84930 & 84931
Description: S/N: JJC0329481 & A45780396
NOT TITLED PER STATE REGULATIONS
FULL OPERATIONS NOT TESTED
*TRAILER INCLUDED*
25FT BEAN HEADER
Hydraulic Re...
Updated: Wednesday, November 13, 2024 12:22 PM
Location: Montgomery, Minnesota
Seller: Housby
Cutting Width: 25 ft
Serial Number: CBJ043964
Condition: Used
Gathering Type: Auger
Hydraulic Hookup: Multi Point
Full Finger Auger: Yes
Description: Was just recently used to finish the 2024 fall harvest seller upgraded to a newer machine. It is a full finger pickup but the bearing went out so t...
Updated: Wednesday, December 04, 2024 02:03 PM
Location: Deep River, Iowa
Seller: Widmer Auction, LLC
Cutting Width: 25 ft
Cutterbar Type: Flex
Serial Number: JJC0225929
Condition: Used
Stock Number: GKT-5929
Fore/Aft Reel: Yes
Description: Case IH 1020 25' Flex Header, Finger Reel, For & Aft, Sells w/Mattson 2-Wheel Transport Trailer - Located Near Grand Forks, ND - For More Informati...
Updated: Wednesday, July 30, 2025 12:41 PM
Location: Grand Forks, North Dakota
Seller: Auctionblock
Cutting Width: 25 ft
Cutterbar Type: Flex
Serial Number: JJC0318312
Condition: Used
Stock Number: GKT-8312
Fore/Aft Reel: Yes
Description: Case IH 1020 25' Flex Header, Finger Reel, For & Aft, Sells w/Hart 2-Wheel Transport Trailer - Located Near Grand Forks, ND - For More Information ...
Updated: Wednesday, July 30, 2025 12:41 PM
Location: Grand Forks, North Dakota
Seller: Auctionblock
Cutting Width: 25 ft
Cutterbar Type: Flex
Air Reel: Yes
Serial Number: JJC0316598
Condition: Used
Stock Number: 319
Description: Case 1020 25’ flex header with Air Reel. Good auger and straight reel.
Marked lot 319.
This is part of a bankruptcy sale conducted by the Ba...
Updated: Wednesday, December 17, 2025 03:11 PM
Location: Beloit, Kansas
Seller: Hoobler Auctions
Air Reel: Yes
Serial Number: UNKNOWN
Condition: Used
Description: 30'CaseIH Grain Header w/Advanced Wind Reel System, SCH Cutter Bar, Duel Drive, Was on a Case IH 2388 Combine. Any questions about this grain head ...
Updated: Wednesday, October 08, 2025 12:21 PM
Location: Byron, Michigan
Seller: Furlo Auction Service
Cutting Width: 18 ft
Serial Number: 000757
Condition: Used
Stock Number: 4452
Description: 1020 Case IH Header Floating and Rigid Platform. 18' cutting width, 18' 10" shipping width .Ideal for both low to the ground crops and grain. W...
Updated: Wednesday, March 18, 2026 03:28 PM
Location: Central Point, Oregon
Seller: J&C Auctions
Cutting Width: 16.42 ft
Serial Number: JJC0089942
Condition: Used
Stock Number: T001504
Description: Case IH 1020 Flex Header
16.5ft
Pickup Reel
Farmer retiring. Nice, clean, older machinery/equipment selling near Red Cloud, NE.
Case IH 1460 ...
Updated: Wednesday, October 09, 2024 12:47 PM
Location: Red Cloud, Nebraska
Seller: Midwest Equipment Auctions
Cutting Width: 30 ft
Air Reel: Yes
Serial Number: JJC0329662
Condition: Used
Gathering Type: Auger
Description: Nick Meyer Estate Auction- Case 1020 Bean Head 30’ w/ AWS air reel, fully fingered, steel snoots, selling w/ homemade header trailer, Serial #JJC03...
Updated: Wednesday, December 10, 2025 02:54 PM
Location: Storden, Minnesota
Seller: Christopher Auction
Cutting Width: 30 ft
Cutterbar Type: Flex
Serial Number: JJC0319733
Condition: Used
Fore/Aft Reel: Yes
Length: 384 in
Description: Header Trailer does go with it;
1020
Updated: Wednesday, December 11, 2024 02:59 PM
Location: Kingman, Kansas
Seller: Floyd Auction
Cutting Width: 25 ft
Cutterbar Type: Flex
Serial Number: UNKNOWN
Condition: Used
Description: Case IH 1020 platform, 25’ cutting width, dual drive, 3” cut, long dividers. Head cart NOT included
Updated: Wednesday, October 09, 2024 12:43 PM
Location: Huntington, Indiana
Seller: A&M Equipment
Cutting Width: 30 ft
Serial Number: JJC0329746
Condition: Used
Fore/Aft Reel Type: Hydraulic
Description: Case IH 102 30' Bean Head
Field tracker
Hydr Fore & Aft
SCH Cutter bar
Updated: Friday, September 27, 2024 05:48 PM
Location: Rock Rapids, Iowa
Seller: Elbers Auction Service
Cutting Width: 25 ft
Cutterbar Type: Flex
Serial Number: JJC0320044
Condition: Used
Stock Number: 346
Gathering Type: Auger
Description: Case IH 1020 flex head with pickup reel. SN: JJC0320044. 25’. Sitting on a 4 wheel header trailer. Trailer is included. The wheels are not in good ...
Updated: Wednesday, December 17, 2025 03:10 PM
Location: Clay Center, Kansas
Seller: Hoobler Auctions
Serial Number: JJC00328531
Condition: Used
Description: Case IH 1020, 25’, **FOR HASSLE FREE & RELIABLE TRANSPORTATION PLEASE CONTACT AGRIVISION LOGISTICS AT 316-706-6950**
Updated: Wednesday, March 04, 2026 12:59 PM
Location: Wetumka, Oklahoma
Seller: Agrivision Asset Management
Cutting Width: 17.5 ft
Cutterbar Type: Flex
Serial Number: JJC0061134
Condition: Used
Poly Skid Shoes: Yes
Gathering Type: Auger
Description: 17.5 foot case IH 1020 head with rock dam HEADER CART INCLUDED
Updated: Wednesday, June 10, 2026 12:10 PM
Location: Hillsboro, Ohio
Seller: Hammer Down Auction Co.
Cutting Width: 22 ft
Cutterbar Type: Flex
Serial Number: JJC0216066
Condition: Used
Gathering Type: Auger
Description: Case IH 1020 Grain Table. 22.5' wide, polly skid plate, polly flex table, SCH cutter bar, oil bath wobble box. Well maintained, available for inspe...
Updated: Monday, December 29, 2025 03:31 PM
Location: Batesville, Indiana
Seller: Davis Family Auctions, LLC
Cutting Width: 20 ft
Serial Number: JJ0224830
Condition: Used
Gathering Type: Auger
Description: Case IH 1020 20-ft. Flex platform with row dividers. Fire & Aft. Driveshaft, Hydraulic reel lift, safety lights.
Updated: Wednesday, November 05, 2025 12:08 PM
Location: Seward, Nebraska
Seller: Weedy Creek Sales & Rentals LLC
Cutting Width: 25 ft
Cutterbar Type: Flex
Serial Number: JJC0316482
Condition: Used
Stock Number: 347
Gathering Type: Auger
Description: Case 1020 25’ flex header. Pickup reel. Sitting on a 4 wheel homemade header trailer. Tires are all flat and probably should not be pulled very far...
Updated: Wednesday, December 17, 2025 03:11 PM
Location: Clay Center, Kansas
Seller: Hoobler Auctions
Cutting Width: 25 ft
Cutterbar Type: Rigid
Serial Number: JJC0320051
Condition: Used
Gathering Type: Auger
Hydraulic Hookup: Multi Point
Description: Case IH 1020 25ft platform, comes with EZ trail 672 head cart that is made for 20ft heads. snouts were removed for storage in the barn they are the...
Updated: Wednesday, August 13, 2025 01:25 PM
Location: Kingston, Illinois
Seller: Almburg Equipment Auctions
Cutting Width: 22.08 ft
Cutterbar Type: Flex
Serial Number: JJC0335953
Condition: Used
Fore/Aft Reel: Yes
Gathering Type: Auger
Description: CASE IH 1020 FLEX PLATFORM
-Hume Reel
-Flex
-22.5' Width
-Fore/Af Reel
-Located in storage near Steele City, NE for your inspection contact th...
Updated: Friday, September 27, 2024 05:40 PM
Location: Steele City, Nebraska
Seller: Elting Auction Co.
Cutting Width: 25 ft
Serial Number: JJC0217983
Condition: Used
Description: Case IH 1020 platform 25'. Good condition. Head trailer sold separately; see Lot 5275. Located in Aplington, IA. Call Mark with questions 319..231....
Updated: Wednesday, November 06, 2024 01:56 PM
Location: Aplington, Iowa
Seller: Mark Arends Auctioneering
Cutting Width: 20 ft
Cutterbar Type: Flex
Serial Number: JJC0326353
Condition: Used
Gathering Type: Auger
Description: Case 1020 header
- 20 FT
- Worked as it should when last used
- Comes with trailer
Please review Pictures and contact Midwest Auction Pros...
Updated: Wednesday, September 10, 2025 03:05 PM
Location: Miltonvale, Kansas
Seller: Midwest Auction Pros
Cutting Width: 15.5 ft
Cutterbar Type: Flex
Serial Number: 000971
Condition: Used
Gathering Type: Auger
Description: Case IH 1020 head, 15.5ft, VERY GOOD CONDITION!! Seller has upgraded machines and is selling this header. Used little and has been shedded when ...
Updated: Wednesday, July 02, 2025 11:41 AM
Location: Everest, Kansas
Seller: S & S Sales LLC
Cutting Width: 20 ft
Serial Number: JJC0085887
Condition: Used
Stock Number: 7
Description: IH 1020 20' bean head on older head cart, SN JJC0085887
Updated: Friday, September 27, 2024 05:32 PM
Location: Sutherland, Iowa
Seller: Vander Werff & Associates
Cutting Width: 20 ft
Cutterbar Type: Flex
Serial Number: JJC0085871
Condition: Used
Gathering Type: Auger
Description: Case IH 1020 Head located on our equipment lot in Washington, Iowa. 20 foot cutting width, LH PTO, Cart is included. Consignor stated it works well...
Updated: Friday, September 27, 2024 05:32 PM
Location: Washington, Iowa
Seller: KDK Sales & Equipment LLC
Serial Number: JJC0329056
Condition: Used
Stock Number: 85652
Description: S/N: JJC0329056
NOT TITLED PER STATE REGULATIONS
FULL OPERATIONS NOT TESTED
20 FT Cutting Width,
3 IN Cut Hydraulic Reel Lift
Hydraulic F...
Updated: Friday, August 08, 2025 10:24 AM
Location: Boone, Iowa
Seller: Housby
Cutting Width: 25 ft
Cutterbar Type: Flex
Serial Number: JJC0093505
Condition: Used
Stock Number: 25foot
Gathering Type: Auger
Description: Case IH 25 FOOT HEAD
ALMOST NEW SCH COMPLETE CUTTER BAR LESS THAN 200 ACRES
AUGER STRAIGHT
WEAR STRIPS
WE CAN LOAD
HEADER CART AVAILABLE
Q...
Updated: Wednesday, September 24, 2025 01:10 PM
Location: Milford Center, Ohio
Seller: RB Equip
Cutting Width: 20 ft
Cutterbar Type: Flex
Serial Number: JJC0216172
Condition: Used
Description: Case IH 1020 20' grain head on consignment. S/N 0216172. Oil bath drive. Pipe reel. Wide cut sickle. Double driveshaft. Light package. Setup for ...
Updated: Friday, September 27, 2024 05:32 PM
Location: Winamac, Indiana
Seller: Olson Auctions
